Frigidaire 134837900A Washer Manual

The Frigidaire 134837900A is a high-efficiency washer designed to provide optimal cleaning performance while conserving water and energy. This manual covers essential information regarding safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include multiple wash cycles, energy-efficient operation, and a large capacity drum for handling various laundry loads.

Feature	Description
Multiple Wash Cycles	Customizable settings for different fabric types and soil levels.
Energy Efficiency	Designed to use less water and energy while maintaining performance.
Large Capacity Drum	Accommodates larger loads, reducing the number of washes needed.
Quiet Operation	Engineered for minimal noise during operation.
Delay Start	Allows you to schedule washes at your convenience.

Installation

Ensure the washer is placed on a stable surface and connected to the appropriate water supply and drainage system.

Remove packaging materials and inspect the washer for any damage.
Connect the water supply hoses to the hot and cold water faucets.
Ensure the drain hose is properly positioned in the drain or standpipe.
Plug the washer into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set your preferences.

Select your preferred language.
Set the water hardness level if applicable.
Choose your default wash cycle settings.

CAUTION! Ensure the washer is level to avoid excessive vibration during operation.

Specifications

Model Number: 134837900A
Capacity: 4.5 cubic feet
Dimensions: 27" W x 30" D x 36" H
Weight: 150 lbs
Power Supply: 120V, 60Hz
Water Consumption: 15 gallons per load
Noise Level: 55 dB

Controls and Settings

The control panel features a digital display for easy navigation through wash cycles and settings.

Buttons: Power, Start/Pause, Cycle Selector, Temperature, Spin Speed, Delay Start.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies for optimal performance.

Turn off the water supply before connecting hoses.
Attach hoses to the washer and faucets securely.
Check for leaks after turning the water supply back on.

Tip: Use Teflon tape on threads for a better seal.

Operating the Washer

Load laundry into the drum, select your desired cycle, and press start.

Open the lid and load clothes evenly.
Add detergent to the designated compartment.
Select the wash cycle and options.
Press Start to begin the wash.

WARNING! Do not overload the washer to ensure effective cleaning.

Maintenance and Care

Regular maintenance will prolong the life of your washer.

Clean the lint filter after every use.
Wipe down the exterior with a damp cloth.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Reset: Unplug for 5 minutes to reset the control board.