Frigidaire 137168300C Washer Manual

The Frigidaire 137168300C is a high-efficiency washer designed to provide excellent cleaning performance while being gentle on your clothes. This manual covers essential information regarding safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash cycles, energy-efficient operation, large capacity drum, and user-friendly controls.

FeatureDescription
Front-loading designAllows for easy loading and unloading of laundry.
Multiple wash cyclesOffers various settings for different fabric types and soil levels.
Energy-efficient operationDesigned to use less water and energy compared to traditional washers.
Large capacity drumAccommodates larger loads, reducing the number of cycles needed.
User-friendly controlsSimple interface for selecting wash settings and options.

Installation

Unpack the washer and inspect for any damage. Place the washer on a level surface and ensure proper ventilation.

  1. Connect the water supply hoses to the back of the washer.
  2. Plug the washer into a grounded electrical outlet.
  3. Level the washer using the adjustable feet.
  4. Run a test cycle to ensure proper operation.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to select your preferred settings.

  1. Select the desired wash cycle using the control panel.
  2. Adjust water temperature and spin speed as needed.
  3. Add detergent to the designated compartment.
  4. Press the start button to begin the wash cycle.

CAUTION! Do not overload the washer to ensure optimal performance.

Specifications

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and monitor the wash progress.

Control Features: Start/Stop button, cycle selector dial, temperature settings, and delay start option.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies for optimal performance.

  1. Turn off the water supply before connecting hoses.
  2. Attach hoses to the appropriate water inlet valves.
  3. Check for leaks after turning the water supply back on.

Tip: Use new hoses to prevent leaks and ensure a secure connection.

Operating the Washer

Follow the instructions for loading laundry and selecting the appropriate wash cycle.

  1. Load laundry into the drum without overloading.
  2. Add detergent and any fabric softener as needed.
  3. Select the desired wash cycle and options.
  4. Press start to begin the wash cycle.

WARNING! Do not open the door during operation; wait for the cycle to complete.

Maintenance and Care

Regular maintenance will ensure the longevity of your washer.

  1. Clean the detergent dispenser regularly.
  2. Check and clean the filter as needed.
  3. Wipe down the exterior with a damp cloth.
  4. Run a cleaning cycle periodically to remove buildup.

CAUTION! Unplug the washer before performing any maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower supply issueCheck power cord and outlet; ensure door is closed.
No water fillingHoses kinked or blockedCheck hoses for kinks; ensure water supply is on.
Excessive vibrationUnlevel washerAdjust feet to level the washer.
Odor from washerMold buildupRun a cleaning cycle with washer cleaner.
Clothes not cleanOverloadingReduce load size for better cleaning.

Service: For further assistance, contact Frigidaire customer support.

Frigidaire 137168300C Washer Manual © - All Rights Reserved 2026