Frigidaire ATF6700FS1 Washer Manual

The Frigidaire ATF6700FS1 is a high-efficiency top-load washer designed to provide superior cleaning performance while being gentle on fabrics. This washer features multiple wash cycles, adjustable water levels, and a variety of settings to accommodate different laundry needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: High-efficiency wash system, multiple wash cycles, adjustable spin speed, and energy-saving settings.

Feature	Description
High-Efficiency Wash System	Uses less water and energy while providing effective cleaning.
Multiple Wash Cycles	Options for different fabric types and soil levels.
Adjustable Spin Speed	Customizable spin speed for optimal drying.
Energy Saver Mode	Reduces energy consumption during wash cycles.
Delay Start	Allows you to set a wash cycle to start later.

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select settings.

Set language: Choose your preferred language on the display.
Program wash cycles: Select default settings or customize as needed.
Run a test cycle: Ensure everything is functioning correctly.

CAUTION! Ensure the washer is empty during the test cycle.

Specifications

Model: Frigidaire ATF6700FS1.
Capacity: 3.9 cu. ft.
Energy Star Rated: Yes.
Dimensions: 27" W x 44" H x 27" D.
Weight: 150 lbs.
Wash Cycles: 12 different cycles.
Spin Speed: Up to 800 RPM.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the digital display. Use the control panel to select wash cycles, adjust settings, and start the washer.

Control Panel: Power, Start/Pause, Cycle Selector, Water Level, Spin Speed.

Connecting Water Supply

Ensure proper connections to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlets on the washer.
Check for leaks after connections are made.

Tip: Use Teflon tape on hose threads to prevent leaks.

Operating the Washer

Load laundry into the washer, select desired cycle, and press Start.

Load clothes: Do not overload the washer.
Select cycle: Choose based on fabric type and soil level.
Press Start: The washer will begin the selected cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water in washer	Hoses kinked	Inspect hoses for kinks or blockages.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Washer vibrating	Unlevel surface	Adjust feet to level the washer.
Odor in washer	Dirty drum	Run a cleaning cycle with washer cleaner.

Reset: Unplug the washer for 5 minutes to reset.

Service: For assistance, contact Frigidaire customer support.