Frigidaire GLWS1233AS1 Washer Manual

The Frigidaire GLWS1233AS1 is a high-efficiency washer designed to provide superior cleaning performance while being gentle on fabrics. It features multiple wash cycles, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Multiple wash cycles	Various settings for different fabric types and soil levels
Energy efficiency	Designed to save water and electricity
Large capacity	Can handle larger loads, reducing the number of washes
Quiet operation	Designed to minimize noise during operation
Delay start	Allows you to set a wash to start at a later time

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your load.
Set water temperature: Adjust based on fabric care instructions.
Load the washer: Do not overload; leave space for clothes to move.

CAUTION! Ensure the washer is properly leveled before use.

Specifications

Model: Frigidaire GLWS1233AS1
Capacity: 3.2 cubic feet
Power Supply: 120V, 60Hz
Water Consumption: 15 gallons per load
Dimensions: 27" W x 36" H x 30" D
Weight: 150 lbs
Wash Cycles: 12 different cycles available

Controls and Settings

Access controls via the front panel. Features include cycle selector, temperature settings, and start/pause button.

Display: LED indicators for cycle status and time remaining.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to ensure a tight seal.

Operating the Washer

Follow these steps to operate the washer effectively.

Load clothes: Do not exceed the maximum capacity.
Select desired wash cycle and options.
Press start to begin the wash cycle.
Monitor the cycle through the display.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Regulatory Information

This washer complies with all applicable safety standards and regulations.

For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water in washer	Water supply issue	Ensure water valves are open.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Washer vibrating	Unlevel installation	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the control board.

Service: 1-800-374-4432; www.frigidaire.com